[QLab] Mac Mini and Video Cues

[Rob Denton]

I take that back. But now I've found that if you use a STOP cue, you
then have to use a START cue. Now we're rolling!

On 10/24/07, Rob Denton <therobdenton at gmail.com> wrote:
> I just downloaded the Video 1.1.5 update and my sequence has been looping
> seamlessly for over 3 hours. No Video sSTOP or Video Fade necessary!
>
>
>
> On 10/23/07, Rob Denton <therobdenton at gmail.com> wrote:
> >
> > Thanks for the advie. I just installed the "reset" feature. I now end up
> with either a freeze on the last cue before the loop or a black screen. Any
> ideas?
> >
> > While we're at it. Have you heard anything about using ProTools MBox with
> QLab?
> >
> >
> >
> > On 10/23/07, Gareth Jeanne <contact at garethjeanne.co.uk > wrote:
> > >
> > > Hi Rob,
> > > As Noah said you will need to stop the video cues otherwise you will run
> into the problems you are describing as more and more resources get used up.
> > >
> > > If after using the stop cues they do not playback on subsequent loops
> you could try inserting reset cues to completely reset the state of the
> video cue once it's finished with, that way each loop of the playlist should
> play as expected. Also of you have one cue starting over the top of another,
> you could do away with the stop cue and just use a  reset once the next
> video has been fired.
> > >
> > > Hope that makes sense!!
> > >
> > > Gareth
> > >
> > >
> > >
> > > On 23/10/2007 21:10, "Noah Mehl" < noah at tritonproductions.net> wrote:
> > >
> > >
> > >
> > > Rob,
> > >
> > > Good to hear from you.  I'm glad to hear that you're using QLab now.
>  Where'd you get the idea? Just kidding!  Anyways, you will need to
> eventually stop the cues before repeating, because Qlab will continue to
> display them, taking up computer resources.
> > >
> > > ~Noah
> > >
> > > On Oct 23, 2007, at 4:07 PM, Rob Denton wrote:
> > >
> > >
> > > I'm using a Mac Mini to try to run a fairly simple loop. 2 short videos
> and some stills. The Mini will play through the cue list once no problem but
> gradually gets clunkier every subsequent time. I've tried inserting stop
> cues after each Video cue, but that stops the cue from playing the next time
> through. Any advice?
> > >
> > >
> > >
> > > Also, does anybody have any advice about using MacMini for video cues?
> > >
> ________________________________________________________
> > > WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> > > Change your preferences or unsubscribe here:
> > >
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
> > >
> > >
> > >
> > > ________________________________
>  ________________________________________________________
> > > WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> > > Change your preferences or unsubscribe here:
> > >
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
> > >
> > >
> > >
> ________________________________________________________
> > > WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> > > Change your preferences or unsubscribe here:
> > >
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
> > >
> > >
> >
> >
>
>