[QLab] Video cues

[Geep (G. P. Howell)]

On Oct 15, 2007, at 11:20 PM, Jeremy Lee wrote:

No, it won't, but would offer more flexibility in routing, which is  
what I was really after.  The solution I used killed 99% of the 120  
Hz buzz.  Again, this is not a priority issue, just a wish list item.

> On Oct 15, 2007, at 10:54 PM, Geep (G. P. Howell) wrote:
>
>> My Macbook has a horrible ground
>> loop problem when I try to route it directly to the console, even
>> with the grounding cable on the power supply.  My solution was to run
>> it into the MOTU Ultralite and run a second output back to the
>> console.  That works well, just more setup to do and cables to run.
>> When you have time, Chris...!!
>
> Um... reprograming the video cue won't solve a ground problem...
>
>> Of course there is probably a way to grab the built in output and
>> route it directly to the MOTU, but it wasn't immediately obvious, and
>> for the sake of time, I did it that way.
>
I tried that and it didn't seem to work, will try it again, probably  
cockpit error.  I've been a CPM-DOS-Windoze person a lot longer than  
a Mac user, takes time and practice to learn the ropes.  Thanks for  
the suggestion.

> System Prefs-> Sound -> Output -> Ultralite should do the trick.   
> You can also grab a copy of SoundSource to change it from the menu  
> bar...

Geep

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.figure53.com/pipermail/qlab-figure53.com/attachments/20071016/9bb534b9/attachment.htm