[QLab] composite video adapter

[Geep (G. P. Howell)]

In the wet blanket department...

Had sorta the same issue on my MacBook Pro, but with a set of CAT5  
balun transformers.  I suspected the problem arose because the Mac  
could not detect the display, but was never able to confirm.  My SWAG  
was that the display detection lines were not included in the  
interface, so the Mac didn't see anything and didn't try to  
interface.  I was using the DVI to VGA adapter that is included from  
Apple, also tried another one of those to no avail.

Geep

G. P. Howell WA4RTS
Partner, HH Audio
ARRL Life Member

On Nov 27, 2007, at 9:02 PM, Jesse Ash wrote:

> now that I'm firing everything up though, I'm finding that the  
> system won't detect my displays (projectors) that I have plugged  
> into the system via the apple DVI to s-video/composite adaptors. I  
> know this isn't specific to Qlab but it might be something y'all  
> could help me with. Cause if this doesn't work, i'm still a wee bit  
> screwed.
>
> Thanks!!
> j
>
> -- 
> Jesse Ash
> 514-932-9809 ________________________________________________________
> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> Change your preferences or unsubscribe here:
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com