[QLab] Interfaces not working with QLab

[grant]

Hi Clay;

So how old are your 410s. The reason I ask is because I have 3 that  
are a couple of years old that have no problem. I also had one where  
because the firewire cable got plugged in upside down ( yes it is  
possible) the chip got fried.

On Nov 4, 2007, at 8:23 PM, Clay Benning wrote:

> FWIW, I have just had to repair one of our FW410's because the  
> firewire chip had gone bad, causing the audio to drop out  
> momentarily during playback. Just keep in mind that while these  
> units offer a good bang for the buck, they are cheap for a reason.  
> If you are using them in a mission-critical application, or just  
> can't afford the down time (ours has taken 3 weeks to get fixed)  
> you should have a spare floating around.




Cheers,

Grant Bardsley
bardsg at shaw.ca

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.figure53.com/pipermail/qlab-figure53.com/attachments/20071104/58080217/attachment.htm