[QLab] Only two outputs are enabled

[Jason Knox]

Hey DT,

Good to hear from you, and thanks for the suggestion.  Yeah, it is a
G5 so I'll look into the driver issue sometime this week.

Qlab works beautifully with my MOTU 896 at home, so I was just sort of
surprised by this issue on the 2408. I guess I've been spoiled by my
time on a Mac (and Qlab) - where everything usually just works.  I'll
have to poke under the hood a bit more on this one.

Hope all is well in NYC.

Jason

On 11/4/07, David Thomas <dtsound at gmail.com> wrote:
> Hi Jason:
>
> What's the processor in the computer? I've run into issues before with
> running the universal binary MOTU drvers on G4/G5's. I think this has
> already been suggested, but you may want to back-date your driver if you're
> running an older machine.
>
> Best,
> DT
>
> On 11/4/07 11:55 AM, "qlab-request at lists.figure53.com"
> <qlab-request at lists.figure53.com> wrote:
>
> > Message: 1
> > Date: Sun, 4 Nov 2007 10:18:59 -0500
> > From: Charles Coes <ccoes1 at gmail.com>
> > Subject: Re: [QLab] Only two outputs are enabled
> > To: "Discussion and support for QLab users." <qlab at lists.figure53.com>
> > Message-ID: <ACEC5988-6C35-4D0B-ACCD-FFA316398F1B at gmail.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > We've had pretty good luck with a 2408 MkII here using a PCI324 card,
> > able to address all of the analogue outs and the digital ones as
> > well.  It might be a driver issue though, MOTU does do some funky
> > things on occasion.  I'll check tomorrow what version we were using.
> > It is also worth checking the settings in the MOTU PCI console
> > application to make sure that you have the analogue/digital I/O
> > turned on for applications to use.
> > Good luck
> > Charles Coes
> > ccoes1 at gmail.com
> > "As I write highly civilized human beings are flying overhead, trying
> > to kill me." - G. Orwell
>
>
> ________________________________________________________
> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> Change your preferences or unsubscribe here:
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>