[QLab] Only two outputs are enabled

[David Thomas]

Hi Jason:

What's the processor in the computer? I've run into issues before with
running the universal binary MOTU drvers on G4/G5's. I think this has
already been suggested, but you may want to back-date your driver if you're
running an older machine.

Best,
DT

On 11/4/07 11:55 AM, "qlab-request at lists.figure53.com"
<qlab-request at lists.figure53.com> wrote:

> Message: 1
> Date: Sun, 4 Nov 2007 10:18:59 -0500
> From: Charles Coes <ccoes1 at gmail.com>
> Subject: Re: [QLab] Only two outputs are enabled
> To: "Discussion and support for QLab users." <qlab at lists.figure53.com>
> Message-ID: <ACEC5988-6C35-4D0B-ACCD-FFA316398F1B at gmail.com>
> Content-Type: text/plain; charset="us-ascii"
> 
> We've had pretty good luck with a 2408 MkII here using a PCI324 card,
> able to address all of the analogue outs and the digital ones as
> well.  It might be a driver issue though, MOTU does do some funky
> things on occasion.  I'll check tomorrow what version we were using.
> It is also worth checking the settings in the MOTU PCI console
> application to make sure that you have the analogue/digital I/O
> turned on for applications to use.
> Good luck
> Charles Coes
> ccoes1 at gmail.com
> "As I write highly civilized human beings are flying overhead, trying
> to kill me." - G. Orwell