[QLab] Only two outputs are enabled

[Charles Coes]

We've had pretty good luck with a 2408 MkII here using a PCI324 card,  
able to address all of the analogue outs and the digital ones as  
well.  It might be a driver issue though, MOTU does do some funky  
things on occasion.  I'll check tomorrow what version we were using.   
It is also worth checking the settings in the MOTU PCI console  
application to make sure that you have the analogue/digital I/O  
turned on for applications to use.
Good luck
Charles Coes
ccoes1 at gmail.com
"As I write highly civilized human beings are flying overhead, trying  
to kill me." - G. Orwell



On Nov 4, 2007, at 12:29 AM, Jason Knox wrote:

> I'll check it out on Monday and get back to you if I find out anything
> interesting.  For now we're just going to use the 410.
>
> Thanks,
>
> Jason
>
> On 11/3/07, Christopher Ashworth <chris at figure53.com> wrote:
>>
>> On Nov 3, 2007, at 9:08 PM, Jason Knox wrote:
>>
>>> It looks like it is a MOTU 2408 problem.
>>>
>>> Everything works fine using an M-Audio 410.
>>>
>>> Chris, is there anything that can be done to get Qlab to recognize
>>> more than 2 outputs on a 2408? (I've updated the 2408 to the latest
>>> driver)
>>
>> I'm afraid I'm not familiar with this particular combination of
>> hardware, so I'm not much help.
>>
>> Does Audio MIDI Setup see all the output channels?
>>
>> -C
>> ________________________________________________________
>> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
>> Change your preferences or unsubscribe here:
>> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>>
> ________________________________________________________
> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> Change your preferences or unsubscribe here:
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.figure53.com/pipermail/qlab-figure53.com/attachments/20071104/adce2009/attachment.html