[QLab] surround sound

[David Wedin]

That would work, but you would only be able to play 2 channels of  
sound... I believe the intent was to get 4 or 6 channels of output.

Sent from David's new iPhone

On Nov 1, 2007, at 10:42 PM, grant <bardsg at shaw.ca> wrote:

> Hi Bruce
>
> An other question - what happens when you play back from ITunes?  
> From the website-----e audio from iTunes is only playing through 2  
> speakers.
> iTunes defaults to two channel output, even if the FireWave is  
> plugged in and is the active output on the Macintosh. However, you  
> can enable the FireWave to output music to all of the speakers in a  
> surround sound setup. To hear iTunes music thru all of the speakers  
> in a surround sound setup, you will need to follow these simple steps:
>
> Open the FireWave application.
> Select the Surround Tab.
> Check on the Pro Logic II box.
> Select Music mode.
> That's it! iTunes should now be playing thru all of the speakers in  
> your surround sound setup.
>
> On Nov 1, 2007, at 6:35 PM, Bruce Vieira wrote:
>
>> RE: Surround sound: The set up: From Firewave outputs L/R I have  
>> plugged into amp A channel A/B with 2 speakers. LS/RS outputs I  
>> have plugged into amp B channel A/B with 2 speakers. At present I  
>> have not set up Firewave to the third amp for the center channel  
>> (but I will need to in the future). Like I said before I'm getting  
>> stereo out of the L/R on the firewave but NOT through the LS/RS  
>> channel. What are "Surround sound encoded files"?
>>
>>
>
> ________________________________________________________
> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> Change your preferences or unsubscribe here:
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.figure53.com/pipermail/qlab-figure53.com/attachments/20071101/ac198d13/attachment.htm