[QLab] surround sound

Thu Nov 1 17:35:35 PDT 2007

RE: Surround sound: The set up: From Firewave outputs L/R I have plugged into amp A channel A/B with 2 speakers. LS/RS outputs I have plugged into amp B channel A/B with 2 speakers. At present I have not set up Firewave to the third amp for the center channel (but I will need to in the future). Like I said before I'm getting stereo out of the L/R on the firewave but NOT through the LS/RS channel. What are "Surround sound encoded files"?

Thanks!

Bruce Vieira

On Thursday, November 01, 2007, at 01:40PM, <qlab-request at lists.figure53.com> wrote:
>Send QLab mailing list submissions to
>	qlab at lists.figure53.com
>
>To subscribe or unsubscribe via the World Wide Web, visit
>	http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>or, via email, send a message with subject or body 'help' to
>	qlab-request at lists.figure53.com
>
>You can reach the person managing the list at
>	qlab-owner at lists.figure53.com
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of QLab digest..."
>
>
>Today's Topics:
>
>   1. Re: surround sound - No stereo (Matt Otto)
>   2. Hot Key / Keyboard Issue (Oliver Waring)
>   3. MOTU V3HD (KO Man Kit)
>   4. Re: MOTU V3HD (Noah Mehl)
>   5. keyboard shortcut to load cue to RAM (Jason Knox)
>   6. Re: keyboard shortcut to load cue to RAM (Andy Leviss)
>   7. Re: keyboard shortcut to load cue to RAM (Jason Knox)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Wed, 31 Oct 2007 16:48:03 -0400
>From: Matt Otto <mottosfx at gmail.com>
>Subject: Re: [QLab] surround sound - No stereo
>To: "Discussion and support for QLab users." <qlab at lists.figure53.com>
>Message-ID: <52FA4D52-9F22-40D8-B5E4-AB532C994F52 at gmail.com>
>Content-Type: text/plain; charset="us-ascii"
>
>I might be misunderstanding your post, but you need to be sending  
>Surround sound encoded files  to the Griffin Firewire surround sound  
>interface for it to split them up into the proper channles otherwise  
>it doesn't understand what do with it. Also how many speakers are  
>conencted to your amps?
>
>=Have fun,
>Matt Otto
>(609) 707-2978
>mottosound at gmail.com
>http://www.mattottosound.com (work in progress)
>AIM: Ottoman42
>
>
>
>
>On Oct 31, 2007, at 3:38 PM, Bruce Vieira wrote:
>
>> Hi,
>> I have the enhanced Audio version of Qlab and have a Griffin  
>> Firewire surround sound interface hooked up to two different amps .
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://lists.figure53.com/pipermail/qlab-figure53.com/attachments/20071031/40c6daa4/attachment.html 
>
>------------------------------
>
>Message: 2
>Date: Wed, 31 Oct 2007 23:35:56 +0000
>From: Oliver Waring <oliverwaring at talk21.com>
>Subject: [QLab] Hot Key / Keyboard Issue
>To: qlab at lists.figure53.com
>Message-ID: <393DA6A7-12BB-4087-BD4F-78D7D6BED686 at talk21.com>
>Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
>Having just caught up with the list I'm glad to see I'm not the only  
>one with this issue.
>I have been raving about Qlab to a client and tried to 'demo' it on  
>his machine last weekend, only to stall the cue and look a fool!
>This was on a Mac Book Pro and i needed a double hit on the space bar!
>
>I have recently switched to a MBP from a G4 PB and have had the same  
>stall in Qlab.
>Extra to that today my keyboard has been intermittently, completely  
>failing all day, (i'm infact suprised i'm managing to write this mail.)
>Even while i was catching up on the list i had to double tap the up  
>arrow in order to read next message!
>
>It appears to me that the issue is not with Qlab but something with  
>the keyboard {i just paused for thought and missed the k from  
>keyboard!!} and or os.
>
>My 2 pence worth.
>
>Ollie
>
>
>------------------------------
>
>Message: 3
>Date: Thu, 1 Nov 2007 11:35:35 +0800
>From: KO Man Kit <kmk at kmkonline.com>
>Subject: [QLab] MOTU V3HD
>To: qlab at lists.figure53.com
>Cc: KO Man Kit <kmk at kmkonline.com>
>Message-ID: <20C6321D-D1B0-476E-B4BD-EAB2771B74EC at kmkonline.com>
>Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
>
>Will Qlab support the MOTU V3HD? If it is, i can use a mac book pro  
>as multiple monitor output.?
>
>http://www.v3hd.com/
>
>Thanks
>
>KMK
>
>
>------------------------------
>
>Message: 4
>Date: Wed, 31 Oct 2007 23:38:39 -0400
>From: Noah Mehl <noah at tritonproductions.net>
>Subject: Re: [QLab] MOTU V3HD
>To: "Discussion and support for QLab users." <qlab at lists.figure53.com>
>Message-ID:
>	<01F18920-2926-4A6E-B26A-7E467A1783BE at tritonproductions.net>
>Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
>I don't think it is supported since it's not a quartz extreme device.   
>I could be wrong...
>
>~Noah
>
>On Oct 31, 2007, at 11:35 PM, KO Man Kit wrote:
>
>> Will Qlab support the MOTU V3HD? If it is, i can use a mac book pro
>> as multiple monitor output.?
>>
>> http://www.v3hd.com/
>>
>> Thanks
>>
>> KMK
>> ________________________________________________________
>> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
>> Change your preferences or unsubscribe here:
>> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>
>
>
>------------------------------
>
>Message: 5
>Date: Thu, 1 Nov 2007 00:59:20 -0400
>From: "Jason Knox" <knox.jason at gmail.com>
>Subject: [QLab] keyboard shortcut to load cue to RAM
>To: "Discussion and support for QLab users." <qlab at lists.figure53.com>
>Message-ID:
>	<bb3315ca0710312159p1806ca28m4e892257d4c4c2ed at mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1
>
>Hi all,
>
>Let me know if there's a way to do this - otherwise it might be a nice
>feature to add in a future update.
>
>Because sound cues can often consist of multiple files that need to
>play back in sync, I'd like to be able to use a very simple (perhaps
>user defined) keyboard shortcut to load into RAM the currently
>selected cue (which in this case would probably be a group cue).  This
>would allow for quick cueing / RAM loading of these sorts of group
>cues during the rehearsal process.  Currently I'm just adding a "Load"
>cue to the end of the previous group so that I can manually load any
>group cue during rehearsal - but this seems somewhat inefficient and
>just adds extra clutter to the cue list.
>
>Once again, there may be a more elegant solution that is currently
>available, but I'm missing it right now.
>
>Thanks,
>
>Jason
>
>
>------------------------------
>
>Message: 6
>Date: Thu, 1 Nov 2007 01:38:02 -0400
>From: Andy Leviss <Andy at DucksEchoSound.com>
>Subject: Re: [QLab] keyboard shortcut to load cue to RAM
>To: "Discussion and support for QLab users." <qlab at lists.figure53.com>
>Message-ID: <D4984C00-4328-4EF1-A837-91617A8CF637 at DucksEchoSound.com>
>Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
>
>
>On Nov 1, 2007, at 12:59 AM, Jason Knox wrote:
>
>> Because sound cues can often consist of multiple files that need to
>> play back in sync, I'd like to be able to use a very simple (perhaps
>> user defined) keyboard shortcut to load into RAM the currently
>> selected cue (which in this case would probably be a group cue).
>
>This is already an option in the "Key Map" section of the  
>"Preferences" screen, called "Load Sequence". I've got it set to "L",  
>I think that's the default, but don't quote me on that :-)
>
>--Andy
>
>
>------------------------------
>
>Message: 7
>Date: Thu, 1 Nov 2007 02:16:50 -0400
>From: "Jason Knox" <knox.jason at gmail.com>
>Subject: Re: [QLab] keyboard shortcut to load cue to RAM
>To: "Discussion and support for QLab users." <qlab at lists.figure53.com>
>Message-ID:
>	<bb3315ca0710312316t163e5c4fh8a28b4c6066bfc6 at mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1
>
>Thanks Andy - that's exactly what I need to do.
>
>Jason
>
>On 11/1/07, Andy Leviss <Andy at ducksechosound.com> wrote:
>>
>> On Nov 1, 2007, at 12:59 AM, Jason Knox wrote:
>>
>> > Because sound cues can often consist of multiple files that need to
>> > play back in sync, I'd like to be able to use a very simple (perhaps
>> > user defined) keyboard shortcut to load into RAM the currently
>> > selected cue (which in this case would probably be a group cue).
>>
>> This is already an option in the "Key Map" section of the
>> "Preferences" screen, called "Load Sequence". I've got it set to "L",
>> I think that's the default, but don't quote me on that :-)
>>
>> --Andy
>> ________________________________________________________
>> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
>> Change your preferences or unsubscribe here:
>> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>>
>
>
>------------------------------
>
>_______________________________________________
>________________________________________________________
>QLab mailing list   (QLab at lists.figure53.com)
>When replying, please quote only what you need; help us
>keep the signal/noise ratio of this list high.  Thanks!
>Change your preferences or unsubscribe here:
>http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>
>End of QLab Digest, Vol 23, Issue 1
>***********************************
>
>