[QLab] Another MIDI question with the m-audio FW410

[Jarrett Krauss]

> M-audio doesn¹t appear as a manufacturer. I tried re-scanning midi and it
> doesn¹t work. The weird part is that it appears as a midi device automatically
> on a G3 I have.
> -jarrett
> 
> 
> Like others have said- you need to create a new MIDI device in the Audio MIDI
> setup, and connect it to the M-Audio's MIDI I/O ports.  Then QLab will be able
> to address your MIDI ports.  No software in OSX can address the I/O ports
> directly, they have to go through a device you create in the setup...
> 
> On May 31, 2007, at 2:36 PM, Jarrett Krauss wrote:
> 
>>  
>>> Sorry I explained it wrong, it shows up as an audio device everywhere on my
>>> computer, including audio midi setup and qlab, however it won¹t show up as a
>>> midi device. My drivers are fully updated.
>>>  
>>>  -jarrett
>>>  
>>>  
>>>  That is the start of your problem. You will need to install the drivers if
>>> you haven't already. If you have call M-Audio their support is decent and
>>> will get you up and running. Once Audio MIDI Setup sees the device the rest
>>> will hopefully fall into place.
>>>  
>>>   
>>>  Have fun,
>>>  =Matt Otto
>>>  off list: mottosound at gmail.com <mailto:mottosound at gmail.com>
>>>  www.mattottosound.com <http://www.mattottosound.com>  (work in progress)
>>>  AIM: ottoman42
>>>  
>>>   
>>>  
>>>  On May 31, 2007, at 1:32 PM, Jarrett Krauss wrote:
>>>  
>>>  
>>>> 
>>>>  No it does not exist in Audio MIDI setup, 
>>>>   
>>>>  
>>> 
>>>  
>>>  
>>> 
>>> ________________________________________________________
>>>  QLab mailing list   (QLab at lists.figure53.com)
>>>  When replying, please quote only what you need; help us
>>>  keep the signal/noise ratio of this list high.  Thanks!
>>>  Change your preferences or unsubscribe here:
>>>  http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>>>  
>> 
>>  
>> ________________________________________________________
>> QLab mailing list   (QLab at lists.figure53.com)
>> When replying, please quote only what you need; help us
>> keep the signal/noise ratio of this list high.  Thanks!
>> Change your preferences or unsubscribe here:
>> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>>  
> 
>  
> -- 
> Jeremy Lee
>     Sound Designer, NYC - USA 829
>         http://www.jjlee.com
> 
>  
> 
> 
> 
> ________________________________________________________
> QLab mailing list   (QLab at lists.figure53.com)
> When replying, please quote only what you need; help us
> keep the signal/noise ratio of this list high.  Thanks!
> Change your preferences or unsubscribe here:
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.figure53.com/pipermail/qlab-figure53.com/attachments/20070531/9774a9ef/attachment.html