[QLab] MIDI and System Exclusive commands

[Jim Carroll]

In my head, I see it as an extension of the MIDI cue. A check box and  
work space at the bottom of the inspector where I could type in the  
Hex codes needed. I would default the SysEX F0 and F7 to begin and  
end and just let the user enter the manufacturer ID and the codes.
Jim

-- 
ShipStore.com™       Worldwide: 518-962-2700
6039 Route 9N                    Fax: 815-461-8145
Westport, NY 12993    Toll Free: 877-SHIPSTORE(744-7786)
                                             Fax: 877-774-7329



On Jul 16, 2007, at 11:43 AM, Michael Keniger wrote:

> "There's a ticket describing a possible "raw MIDI string" cue, but it
> doesn't exist yet:"
>
> Would it need to be a seperate cue type, or could it be integrated  
> into the
> MIDI cue inspector - so that a MIDI cue is either sending MIDI or  
> SYSEX?
> The facility to capture SYSEX / MIDI within the cue inspector would  
> be very
> useful.
>
> _________________________________________________________________
> Tell MSN about your most memorable emails!  http:// 
> www.emailbritain.co.uk/
>
> ________________________________________________________
> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> Change your preferences or unsubscribe here:
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com