[QLab] Echo AudioFire12 and a few other questions.

[Alex Bullitt]

That issue was a single time issue.

As I recall, it WOULD reset the sample rate every power up/down of  
the AudioFire, but I am not sure about this, and whether it was power  
up/down or connection to a computer. I suspect it was Power Up/Down.

It defaulted to 44.1 kHz as I recall.

Alex

On Jul 11, 2007, at 3:53 PM, Gareth Jeanne wrote:

> Does it do this every time it is reconnected or just the first  
> time, the
> reason i ask is that we will be having two mac mini's running in  
> parallel in
> case of disaster, so if one did go down it would need to be re- 
> plugged mid
> show. Assumiing the defaulting to no patch problem is sorted by  
> then. Chris?
>
> Cheers
>
> Gareth
>
> -----Original Message-----
> From: Alex Bullitt [mailto:bullitt at stanford.edu]
> Sent: 11 July 2007 20:40
> To: contact at garethjeanne.co.uk; Discussion and support for QLab users.
> Subject: Re: [QLab] Echo AudioFire12 and a few other questions.
>
> Gareth,
>
> I did a show in the spring using an Echo AudioFire8 and it was fine.
>
> The one issue I had with the AudioFire was that by default, it would
> patch through Input 1 to output 1, In 2 to Out 2, and so on (this was
> the first time it was used). Once you adjust the levels in the
> internal matrix using Echo's software, it's all good.
>
> Alex
>
> On Jul 11, 2007, at 11:37 AM, Gareth Jeanne wrote:
>
>> Has anyone use the echo audiofire 12 with Q-Lab, i need a 12 output
>> firewire interface to use with a mac mini and this one seems to fir
>> the bill, it is fully core audio and core video compatible.
>>
>> Also has anyone any experience with running qlab from midi, i would
>> like to be able to assign a midi remote to operate a go, forward
>> and back operation, anyone tried this, or am i better of using a
>> midi to keystroke device?
>>
>> And finally, anyone know how reliable the standard 5400rpm drives
>> are for playback, i really don't want to have to disassemble them
>> to fit 7200 ones.
>>
>> Cheers
>>
>> Gareth
>>
>> ________________________________________________________
>> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
>> Change your preferences or unsubscribe here:
>> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com
>
> ________________________________________________________
> WHEN REPLYING, PLEASE QUOTE ONLY WHAT YOU NEED.  Thanks!
> Change your preferences or unsubscribe here:
> http://lists.figure53.com/listinfo.cgi/qlab-figure53.com